AB1600_V0.3
Single Tone Transmission
When CTX_START is selected, a continuous single-tone signal without any modulation (i.e. Carrier Only)
will be sent out at RF port. User may first set different RF frequency and TX power setting on the
from 2402 to 2480, and Tx GC ranges from 16 to 63.
To save the current Tx GC setting, click the Write to EEPROM button.
Figure 4-1 Single tone transmission setting of Tx Tab
Continuous Data Transmission
When CTX_DATA is selected, a continuous modulated signal will be sent out at RF port. User may
first set different RF frequency, TX power setting, and choose modulation type with data format on the
from 2402 to 2480, and Tx GC ranges from 16 to 63. The data format supports all 0, all 1, 1010, and PN.
GFSK, 1/4pi-DQPSK, and D8PSK are supported for the modulation type.
To save the current Tx GC setting, click the Write to EEPROM button.
Summary of Contents for AB1602
Page 5: ...AB1600_V0 3 Figure 2 2 Figure 2 3 1 2 3 4 5 6 3 3V GND RTS CTS TX RX...
Page 7: ...AB1600_V0 3 Figure 2 5...
Page 11: ...AB1600_V0 3 Figure 4 2 Continuous data transmission setting of Tx Tab...
Page 13: ...AB1600_V0 3 Figure 4 4 LE Transmitter Test setting of Tx Tab...
