6
UV Air Sanitizer User Manual
Placement for Use
2
. Place
3-in-1
air sanitizer upright when using to ensure normal running.
3
. Place
3-in-1
air sanitizer in
populated
area
s
to effectively improve the indoor air quality.
1
. Do not place the
3-in-1
air sanitizer near curtains to avoid and prevent the curtain being
drawn into
the sanitizer and damaging it.
Notice: Check the filter before using. Do not use this product if the filter is damaged.
Replace filter if there are cracks or holes in the filter.
The
air sanitizer is recommended for use in a single, closed room up to 165 square feet
and the heating function comfortably heats up to 600 square feet.
Operation
Press the O
N
/O
FF
button to switch on the air sanitizer, press again to shut off
the air sanitizer.
Fan
Only
UV
Air Sanitizing
Press the UV
FAN
button to switch on the UV-C l
amp
to effectively kill bacteria in
the air.
Note, the blue light behind the grille is not the UV-C wavelength. The UV-
C lamp is contained in the bottom of the product. The light behind the grille is
LED to indicate the product is in air sanitizing mode.
The Main Power Switch is located on the back of the Air Sanitizer near the power
cord. When the Main Power Switch is turned on there will be a prompt sound,
and the red light under the O
N
/O
FF
button will be on, indicating there is power
to the control panel.
Press UV
FAN
button
once and the blue LED indicator light
under UV
comes on
and the display shows U1 (low fan speed), press the UV
FAN
button
a second
time
and the display shows U2 (high fan speed).
Press UV
FAN
button
a three times
and the blue LED indicator light
under FAN
comes on
or press the FAN button on the remote
and the display shows
F
1 (low
fan speed), press the UV
FAN
button
a fourth time
or the FAN button a second
time on the remote
and the display shows
F
2 (high fan speed).
Press UV FAN button a fifth time to shut off the fan.
Main Power Switch
O
N
/O
FF
Button
