SAFETY INSTRUCTIONS
WARNINGS
Place of installation and serial numbers (S/N):
Type:
Delivery date:
Place of installation:
S/N of Air handling unit:
This Manual must be read before installing
the Airmaster air handling unit. Following
this Manual will ensure this product is oper-
ated correctly.
The installation engineer is responsible for
ensuring that the unit is installed according
to current regulations and standards.
When installing the air handling unit in a room
with a fire or stove drawing air from the room,
all applicable provisions must be observed.
The unit should not be installed in rooms with
abrasive particles or flammable or corrosive
gas in the air, in wet rooms or explosion-
protected rooms.
The unit should not be used without the
filters specified in the Operator’s Manual.
The manufacturer cannot be held liable for
damage arising from use or installing in
contravention of these instructions.
The manufacturer reserves the right to make
changes without notice. All values stated
are nominal values and can be affected by
local conditions.
Failure to observe the warnings indicated by
a danger symbol implies a risk of personal
injury or damage to property.
This manual relates to the Airmaster unit it
accompanies plus all equipment, and must
be given to and saved by the unit’s owner.
All necessary data and guides to network
integration can be downloaded from
.
Service covers may not be opened without
first disconnecting the unit’s power supply
and preventing use.
The unit may not be started up until all service
covers and grates on duct connections have
been installed.
Summary of Contents for AM 1000
Page 1: ...1 2 3 AM 1000 INSTALLATION...
Page 4: ...4...
