AirMan SG, Instruction Manual, Page: 16 / 66

3. Installation
3
-
2
A090641
A050506-1
PC002
3.2 Conditions of Unit Installation
Exhaust gas from the engine is poisonous, and it could cause
casualties when it is inhaled.
Avoid using the machine in an insufficiently ventilated building
or a tunnel. When the machine is unavoidably used in such
insufficiently ventilated place, ventilation devices and ventilation
pipe should be provided for better ventilation.
In case that the unit is installed indoors for
operation, suction air port and exhaust fume
outlet port should be provided for better air
ventilation.
Make sure to secure enough space in front
of air suction port and also to secure it after
exhaust fume outlet port so that the engine
may not get overheated.
Exhaust fume pipe extension should be
provided to send exhaust fume out of the
installation place.
Outlet port of radiator cooling air should be equipped outdoors with a duct or the like provided so
that cooling air can be exhausted outdoors.
(Engine blowby gas is exhausted together with cooling air through a duct.)
In case that the unit is installed inside any
tunnel, make sure to provide fresh air and
ventilate it.
In this case, make sure to extend the
exhaust fume pipe outdoors, and also make
sure to prevent any leak from any
connection pipes.
In case that the unit is installed indoors
Exhaust fume
(or gas)
Exhaust fume
outlet port
Exhaust fume
extension pipe
Suction air
inlet port
Installing the unit st such poorly-ventilated place
○
×
Exhaust fume
extension pipe
Exhaust fume
(or gas)
Suction air is fed
by air blower.
Exhaust
Ventilation