AirMan SG, Instruction Manual, Page: 15 / 66

3. Installation
3
-
1
A090402
A090400
A090401
3.1 Transporting Unit
Use the lifting bail
“
1
”
at the center of bonnet for hoisting up
and down the machine.
Since the rope hook is not strong enough to be used for
hoisting, never use it to prevent falling accident.
When transporting the machine, be sure to put it on the
truck bed and use the rope hooks
“
2
”
to secure it with rope.
Do not hoist up the machine while it is running.
Otherwise, a fatal trouble or serious accident may occur.
3.1.1 Lifting
Use the lifting bail
“
1
”
fitted on center of bonnet.
Adjust the lifting point position, according to the fuel volume filled.
Select an appropriate crane or truck by referring to the mass and dimensions mentioned in
“Specifications”.
Only a qualified crane operator is allowed to operate a crane.
3.1.2 Securing a machine on truck bed when transporting
When moving or transporting a machine from site,
place it on truck bed and fasten it by ropes
“
3
”
at two
hooks
“
2
”
on both right and left sides and 4 points on
the common frame.
1
1
2
2
4 3
Transportation
2
Lifting point position when fuel is not filled up.
Lifting point position when fuel is filled up.
Front
(at side of fuel tank)