5. Periodic Inspection/Maintenance
5
-
11
5.5.14
Clean inside of the oil fence and check it for any rust
[Every 1 years]
<Procedure>
①
Remove the fuel pipes and electric wire connected to the fuel tank.
②
Remove 8 pieces of the bolts connecting oil fence and the machine with the lifting eye hooked with
the crane.
③
Lift up the machine to separate the oil fence from the machine.
④
Check and clean the inside of the oil fence.
Check the inside of the oil fence for dust, fur and other foreign matter and check it for any rust.
When the oil fence is found rusted, remove the rust outside and inside and paint it again.
Should any leakage be found, contact your dealer or us directly.
⑤
Check whether the seal rubber attached on the top of oil fence is slanted or curved.
⑥
Combining this machine and the oil fence, tighten the nuts 8 pieces.
⑦
Install fuel pipes and also electric wires.
For details, refer to engine operation manual.
A070327-1
Combining this machine
and oil fence with the
nuts 8 pieces
Oil fence
Fuel Tank
[This machine]
Seal rubber
Seal rubber
Connecting to the
electric wire
A
B
Connecting to the
electric wire
Discount-Equipment.com
Summary of Contents for SDG100S-8B1
