1.Safety
1
-
6
H990432
D004
H990433
Do not operate the machine with service valves and relief
valve open unless air hoses and/or pipes are connected.
High-pressurized air blows out and its air pressure could
cause injury to the people nearby.
When the machine has to be unavoidably temporarily
operated with its port open, be sure to mount a silencer to
reduce noise and wear protective materials such as
earplugs to prevent damage to hearing.
Never work nearby hot portions of the machine while it is
running.
Do not touch hot portions of the machine while inspecting the
machine when running.
Such parts as engine, exhaust manifold, exhaust pipe,
muffler, radiator, oil cooler, air-end, pipe, separator receiver
tank, and discharging pipe are especially hot, so never touch
those parts, because it could cause serious burns.
Compressor oil, coolant water, and engine oil are also very
hot and dangerous to touch.
Avoid checking or refilling them while the machine is running.
Do not, under any circumstance, bring lit cigarettes or
matches near such oils as engine oil and compressor oil, etc.
They are extremely flammable and dangerous, so be careful
when handling.
Refilling oils should be done in an outdoor well-ventilated
place.
Refuel after stopping the engine, and never leave the fuel
nearby the machine. Do not spill. It may cause a fire. When it
is spilt, wipe it up completely.
Do not fill fuel oil up to the cap level. When fuel tank is
filled up to the cap level, fuel oil will be overfilled due to
volume expansion caused by rise of ambient
temperature. Further, fuel will be possibly spilled from
fuel tank due to vibration caused during movement
and/or transportation of the machine.
Such parts as muffler and exhaust pipe can be extremely hot.
Remove twigs, dried leaves, dried grass and waste paper,
etc. from the exhaust outlet of the muffler.
Keep a fire extinguisher available by the machine in case of
a fire.
Operation with compressed air supply port opened
is prohibited
D003
Do not touch hot parts
Fire prevention
Summary of Contents for PDSE900S-4B1
