AIRLUX AHCB40IX, Instruction Manual

Page: 8 / 55

7
in the ducting version.
Electrical Connection
* Electrical wiring must be done by a qualified person(s) in accordance with
all applicable codes and standards.
Turn off electrical power at service
entrance before wiring .
* If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
* Do not use the plug and an extension cord other than the ones initially
supplied with the hood.
INSTALLATION
Before beginning installation, to better
handle the hood, we advise removing the
filter.
Before fixing, the outlet exhaust duct for air
evacuation to the outside must be installed.
Use an outlet exhaust duct with: - minimum indispensable length;
-Minimum possible bends (maximum angle of bend: 90°); -certified material
(according to local, building & fire regulations); and as smooth as possible
inside. It is also advisable to avoid any drastic changes in duct cross-section
(recommended diameter: 125mm).
Drill the hole in the kitchen unit for the air outlet (133 mm diameter)
。
Proceed with fixing the hood: Based on your requirements, you can fit the
hood on the wall or on a wall unit of your kitchen. IMPORTANT: Respect the
distance between the hob and lower part of the hood which must be at least
650mm.
Decide from the outset on the type of installation (recirculation or
ducting). For greater efficiency, we recommend you install the hood