AIRLUX AFP, Operating

Page: 29 / 48

29
Operating
English
6. Press any key to disable the audible signal.
7. The oven will turn off automatically.
8. The oven’s heating process has ended,
however the oven is extremely hot and
cannot be used.
The cooling motor will operate and the
symbol will remain on until the oven cools
down.
IMPORTANT
The cooling process may vary according
to room temperature because of the high
temperatures inside the oven.
9. Once your oven has cooled the symbol
will go off and the door will unlock.
10.
Open the oven door and wipe the
inside with a damp cloth, cleaning up the
ash produced during the cleaning cycle.
Hard-to-reach areas in the oven will need to
be cleaned with a non-metal fibre scourer.
11.
Once the oven is clean, do not forget to
replace the runners and accessories.
12. The oven is now ready to be used again.
IMPORTANT
If you have any problems with the program-
ming and use of this feature, consult the
Installation and Maintenance booklet includ-
ed with your oven.
IMPORTANT
The oven is programmed and the pyrolytic
cleaning cycle is under way.
In the first 10 minutes you can delay the
start of the pyrolysis by programming an
end time. To do so, press the button
to
access the timer options menu. Once the
end time has been selected confirm it using
the button
.
During the pyrolytic cycle you cannot select
a different timer option. If you wish, you can
activate the child safety lock.
Do not try to open the oven door as this may
interrupt the cleaning process.
5. When the pyrolytic cleaning cycle ends, an
audible signal will sound, the symbol will
flash and 00:00 will appear on the screen.