AirLive WP-201G v2 User’s Manual
67
8.4.3 TCP/IP
You can configure the print server to automatically get IP from DHCP server or manually specify static IP. The
print server also has a built-in DHCP server. You can enable this DHCP server and let it manage IP for you.
If you need the print server to automatically get an IP from DHCP server, select “Enable Obtain TCP/IP
Settings Automatically (Use DHCP/BOOTP)”. You can also select “Disable Use the following TCP/IP Settings”
to manually assign “IP Address”, “Subnet Mask” and “Gateway” for the print server.
You can enable/disable or set auto for the print server’s DHCP server. The DHCP server is disabled by default.
If the DHCP server is enabled or set to Auto, you have to assign a range o IP addresses here. Fill in the “Start
IP”, “Range”, “DNS”, “Subnet Mask” and “Gateway”, and the print server will assign a unique IP for each client.
Note that when “Auto” is selected, the DHCP server of the print server will be enabled only when there is no
other DHCP server within the network.
