AirLive WP-201G V2 User Manual Download Page 36

Page: 36 / 97

AirLive WP-201G v2 User’s Manual

Step 1

If this is your first time installing the print server, please install the administrator software on Windows

NT/2000/2003 server first. Refer to Section 3.2 for installation instructions.

If your network has already installed a working print server and your Windows NT/2000/2003 server has not

yet installed the PTPP driver, please install the client software. Refer to Section 3.4 and 3.5 for installation

instructions.

Step 2

Please add/configure the Peer-to-Peer Printing of the Windows NT/2000/2003 network printer and verify that

you can print from Windows NT/2000/2003 to the print server by the installed PTPP driver.

Step 3

Share the above server’s printer to the network by performing the standard Windows printer sharing process.

Summary of Contents for WP-201G V2


































































































Search results

Summary of Contents for WP-201G V2

Reviews:

Related manuals for WP-201G V2

Brands by name

Popular brands

AirLive WP-201G V2, User Manual

Search results

Summary of Contents for WP-201G V2

Reviews:

Related manuals for WP-201G V2

Brands by name

Popular brands