manualshive.com logo in svg

AirLive WN-151ARM, User Manual

Share
Download
AirLive WN-151ARM User Manual Download Page 56

 
 

AirLive WN-151ARM User’s Manual 

56

 

 

Access Control Screen 

 

Internet Access   

Access Control

 

Select the desired options for the current group: 

•

 

Disable

 - Nothing is blocked. Use this to create the least restrictive 

group.  

•

 

Block all Internet access

 - All traffic via the WAN port is blocked. Use 

this to create the most restrictive group.   

•

 

Block selected Services

 - You can select which Services are to block. 

Use this to gain fine control over the Internet access for a group. 

Blocked 

Services 

This lists all defined Services. Select the Services you wish to block. To 

select multiple services, hold the CTRL key while selecting. (On the 

Macintosh, hold the SHIFT key rather than CTRL.) 

Schedule 

If Internet access is being blocked, you can choose to apply the blocking 

only during scheduled times. (If access is not blocked, no Scheduling is 

possible, and this setting has no effect.) 

Trusted PCs 

Click to Enable 

Trusted PC

 

If enabled, restrictions set on this screen do not apply to Trusted PCs. 

"Set Trusted 

PCs" Button 

Click this button to add or remove PCs of the Trusted PCs. 

See the following section for details of the 

Trusted PCs

 screen. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for WN-151ARM
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands