manualshive.com logo in svg

AirLive WN-151ARM, User Manual

Share
Download
AirLive WN-151ARM User Manual Download Page 11

 

AirLive WN-151ARM User’s Manual 

11

 

 

Security Features 

•

 

Password - protected Configuration: 

  Password protection is provided to prevent unauthorized 

users from modifying the configuration data and settings. 

•

 

Wireless LAN Security:

    WPA-802.1x, WPA2-802.1x and WEP and Wireless access control by 

MAC address are all supported. The MAC-level access control feature can be used to prevent 

unknown wireless stations from accessing your LAN. 

•

 

NAT Protection:

 

 

An intrinsic side effect of NAT (Network Address Translation) technology is that 

by allowing all LAN users to share a single IP address, the location and even the existence of each 

PC is hidden. From the external viewpoint, there is no network, only a single device - the 

WN-151ARM. 

•

 

Firewall:

    All incoming data packets are monitored and all incoming server requests are filtered, 

thus protecting your network from malicious attacks from external sources. 

•

 

Protection against DoS attacks:

    DoS (Denial of Service) attacks can flood your Internet 

connection with invalid packets and connection requests, using so much bandwidth and so many 

resources that Internet access becomes unavailable. The WN-151ARM incorporates protection 

against DoS attacks. 

 

 

 

 

 

Summary of Contents for WN-151ARM
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands