AirLive WL-2000CAM User’s Manual
22
6-1-3-5 IP Notification
When network notify type is set to
On
, you can send an e-mail notification of the completion of the network
setting.
Notify type
：
Select type of DHCP, Static IP and PPPoE will notify.
SMTP server name
：
Type the SMTP server name up to 64 characters, or the IP address of the SMTP server.
Authentication
：
Select the authentication required when you send an email.
Off:
Select if no authentication is necessary when an email is sent.
On:
When authentication is necessary an e-mail is sent, select one of the authentication methods from the
followings.
SMTP:
Select if SMTP authentication is necessary when an e-mail is sent.
POP before SMTP:
Select if POP before SMTP authentication is necessary when an e-mail is sent.
Note
：
• When you set to
On
, be sure to select either or both
SMTP
or/and
POP before SMTP
.
POP server name
：
It is necessary when the
POP before SMTP
is selected in
Authentication
. Type the POP
(receiving mail) server name up to 64 characters, or type the IP address of the POP server. This setting is
necessary when the SMTP server which sends e-mails performs authentication using the POP user account.
User name, Password
：
Type the user name and Password of the user who has the mail account. This setting is
necessary when the SMTP server which sends e-mails performs authentication.
Recipient e-mail address
：
Type the recipient e-mail address up to 64 characters. You can specify up to three
recipient e-mail addresses.
Administrator e-mail address
：
Type the Administrator e-mail address up to 64 characters. This address is
used for reply mail and sending system messages from the SMTP server.
Subject
：
Type the subject/title of the e-mail up to 64 characters. With respect to mail which is sent according to
the IP notification.
Message
Type the text of the e-mail up to 384 characters. Default value provides network information including IP, Port,
MAC, Model, Firmware Version and Web Version.
