AirLive WFP-101U, User Manual

Page: 55 / 133

IP Address Assignment:
Click the “IP” button to enter the IP setting page. If you need the MFP Server
to automatically get an IP from DHCP server, select “Auto IP”. You also can
select “Static IP” to manually assign “IP Address”, “Subnet Mask” and
“Gateway” for the MFP Server. By default, “Static IP” is enabled and the
default settings are as follows.
IP Address: 192.168.2.2
Subnet Mask: 255.255.255.0
Auto IP – The IP Address information of the MFP Server obtained from DHCP
Server will be displayed in the address field. If no DHCP Server is present,
you have to assign the information manually.
Static IP – Manually assign the IP address information in the same network
with your computer to the MFP Server.
DHCP Server:
Click the “DHCP Server” button to enter into the DHCP server’s setting page.
By the default, the DHCP server is disabled.
Auto – If “Auto” is selected, the MFP Server will detect DHCP server within
the network automatically and once the DHCP server doesn’t exist, the MFP
Server will turn on his own DHCP server and assign IP Address to client.
Please fill in the “Starting Address”, “Range”, “Subnet Mask”, “Gateway” and
“DNS”; then the MFP Server will assign a unique IP within the range for each
DHCP client.
Enable – If the DHCP is enabled, you have to assign a range of IP addresses.
Fill in the “Starting Address”, “Range”, “Subnet Mask”, “Gateway” and “DNS”;
then the MFP Server will assign a unique IP within the range for each DHCP
client.
Disable – The DHCP Server is disabled. You have to build up a DHCP Server
in the network or set the IP Address for each client manually.
48 AirLive WFP-101U User’s Manual