manualshive.com logo in svg

AirLive N450R, User Manual

Share
Download
AirLive N450R User Manual Download Page 94

3. 

 

 
 
 

 AirLive N450R User’s Manual 

 

93

(A) FTP 

e

 

 remember the job easily, and the device would use this name to info you 

2. 

RL for the file you want to download. You have to use this format: 

3. 

ination path on USB disk that you want to save files.Default value is 

4. 

can access this site without any authentication Account; you have to 

5. 

 device will start FTP download on the time that you specified. The 

At 

 be started immediately. 

Configuration

1. Job Nam

It’s for you to
when the job is done. 

URL

 

The U
IP/path/file, you don’t have to add protocol part such like “

ftp://

”. 

Save To

 

The dest
/C/Download/FT 

Login method

   

Anonymous, you 
enter the username and password to login. 

Start Time

   

Schedule: this
schedule job that is saved could be check on Status page by selecting “View 
Scheduled Download Status”. 

Once: the FTP download would

 

 

 

 

 

Summary of Contents for N450R













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands