3.
AirLive N450R User’s Manual
67
Configuration
3.4.5 MAC Control
MAC Address Control allows you to assign different access right for different users and to
assign a specific IP address to a certain MAC address.
1. MAC Address Control
Check “Enable” to enable the “
MAC Address Control
”. All of the settings in this
page will take effect only when “Enable” is checked.
2. Connection control
Check "
Connection control
" to enable the controlling of which wired and wireless
clients can connect with this device. If a client is denied to connect with this device,
it means the client can't access to the Internet either. Choose "
allow
" or "
deny
" to
allow or deny the clients, whose MAC addresses are not in the "Control table"
(please see below), to connect with this device.
3. Association control
Check "Association control" to enable the controlling of which wireless client can
associate to the wireless LAN. If a client is denied to associate to the wireless LAN,
it means the client can't send or receive any data via this device. Choose "
allow
"
or "
deny
" to allow or deny the clients, whose MAC addresses are not in the
"Control table", to associate to the wireless LAN.
Click on “
Save
” to store your settings or click “
Undo
” to give up the changes.
