manualshive.com logo in svg

AirLive N450R, User Manual

Share
Download
AirLive N450R User Manual Download Page 102

3. 

 

 
 
 

 AirLive N450R User’s Manual 

 

101

Configuration

3.7.6 Reboot 

You can also reboot this device by clicking the 

Reboot

 function item. 

 

 

3.7.7 Miscellaneous – Wake on LAN & Ping 

 

1.  MAC Address for Wake-on-LAN 

It enables you to power up a networked device remotely. If you would like to trigger this 
function, you have to know the MAC address of this device. For instance if the MAC 
address is 00-11-22-33-44-55, enter it into the blank of MAC Address for 
Wake-on-LAN. Afterwards, click "

Wake up

" button which makes the router to send the 

wake-up frame to the target device immediately. 

 

2.  Domain Name or IP address for Ping Test 

Allow you to configure an IP, and ping the device. You can ping a specific IP to test 
whether it is alive.

 

Click on “

Save

” to store your settings or click “

Undo

” to give up the changes. 

 

 
 
 

Summary of Contents for N450R













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands