Airlinkplus AR315W User Manual Download

Page: 65 / 96

Advanced Features

Buttons

Delete/Delete All

Use these buttons to delete the selected entry or all entries, as required.
Multiple entries can be selected by holding down the CTRL key while
selecting. (On the Macintosh, hold the SHIFT key while selecting.)

Add

Use this to add the current Filter String to the site list.

Virtual Servers

This feature, sometimes called

Port Forwarding

, allows you to make Servers on your LAN

accessible to Internet users. Normally, Internet users would not be able to access a server on
your LAN because:

•

Your Server does not have a valid external IP Address.

•

Attempts to connect to devices on your LAN are blocked by the firewall in this device.

The "Virtual Server" feature solves these problems and allows Internet users to connect to your
servers, as illustrated below.

Figure 4: Virtual Servers

IP Address seen by Internet Users

Note that, in this illustration, both Internet users are connecting to the same IP Address, but
using different protocols.

To Internet users, all virtual Servers on your LAN have the same IP Address.
This IP Address is allocated by your ISP.

This address should be static, rather than dynamic, to make it easier for Internet users to con-
nect to your Servers.
However, you can use the

DDNS (Dynamic DNS)

feature to allow users to connect to your

Virtual Servers using a URL, instead of an IP Address.

Summary of Contents for AR315W

































































































Search results

Summary of Contents for AR315W

Reviews:

Related manuals for AR315W

Brands by name

Popular brands

Airlinkplus AR315W, User Manual

Search results

Summary of Contents for AR315W

Reviews:

Related manuals for AR315W

Brands by name

Popular brands