Airlinkplus AR315W User Manual Download

Page: 45 / 96

Operation and Status

Disconnect

If connected to your ISP, hang up the connection.

Clear Log

Delete all data currently in the Log. This will make it easier to read
new messages.

Refresh

Update the data on screen.

Connection Status - L2TP

If using L2TP, a screen like the following example will be displayed when the "Connection
Details" button is clicked.

Data - L2TP Screen

Connection

Physical Address

The hardware address of this device, as seen by remote devices on the
Internet. (This is different to the hardware address seen by devices on
the local LAN.)

IP Address

The IP Address of this device, as seen by Internet users. This address
is allocated by your ISP (Internet Service Provider).

Connection Status

This indicates whether or not the connection is currently established.

•

If the connection does not exist, the "Connect" button can be
used to establish a connection.

•

If the connection currently exists, the "Disconnect" button can be
used to break the connection.

Summary of Contents for AR315W

































































































Search results

Summary of Contents for AR315W

Reviews:

Related manuals for AR315W

Brands by name

Popular brands

Airlinkplus AR315W, User Manual

Search results

Summary of Contents for AR315W

Reviews:

Related manuals for AR315W

Brands by name

Popular brands