background image

1. Introduction 

 
Congratulations on your purchase of the Airlink101® Wireless 300N PCI Adapter. Its 
high bandwidth combined with extended wireless coverage delivers fast and reliable 
connection for all of your networking applications when used with other Airlink101® 
Wireless 300N products. 
 
A full range of security features such as WEP, WPA-PSK, and WPA2-PSK provide the 
highest level of wireless network security. The bundled Wireless Utility allows you to set 
up the adapter with an easy-to-use user interface. Best of all the Wireless 300N PCI 
Adapter works with 802.11g and 802.11b network devices ensuring compatibility with 
your existing wireless products.  
 

1.1 Package Contents 

 
Before you begin the installation, please check the items of your package. The package 
should include the following items: 
 

  Wireless 300N PCI Adapter 

 Antenna 

  Quick Installation Guide 

 Installation 

CD 

(Driver/Utility/Manual) 

 

1.2 Features 

 

  Industry’s highest wireless data rate of up to 300Mbps with IEEE 802.11n draft 

specification 2.0 

  External 3 dipole antennas for wider coverage and continuous connectivity 

eliminates dead spots 

  64-bit/128-bit WEP encryption, Pre-shared Key (PSK), and Wi-Fi Protected 

Access (WPA2 and WPA) support provide full protection for your wireless 
connection 

  Higher data rate increases the reliability and stability of wireless connections 

 Great 

for 

environments 

with higher wireless data traffic requirements 

  Fully backward-compatible with 802.11b/g devices 

  Works best with AirLink101® Wireless 300N products 

 
 
 
 
 
 

Summary of Contents for AWLH6090









































Reviews: