Airlink101 802.11g AR315W User Manual Download Page 80

Page: 80 / 88

Upgrade Firmware

The firmware (software) in the Wireless Router can be upgraded using your Web Browser.

You must first download the upgrade file, then select

Upgrade

on the

Administration

menu.

You will see a screen like the following.

To perform the Firmware Upgrade:

1. Download the firmware from the manufacturer’s web site.

2. Unzip the file to a folder in your computer.

3. Log in to the router’s web configuration and go to Administration, Upgrade Firmware.

4. Click the “Browse” button and navigate to the location of the new firmware file.

5. Select the new firmware file.

6. Click the “Start Upgrade” button to commence the firmware upgrade.

The Wireless Router is unavailable during the up-
grade process, and must restart when the upgrade is
completed. Any connections to or through the Wire-
less Router will be lost.

Summary of Contents for 802.11g AR315W

























































































Search results

Summary of Contents for 802.11g AR315W

Reviews:

Related manuals for 802.11g AR315W

Brands by name

Popular brands

Airlink101 802.11g AR315W, User Manual

Search results

Summary of Contents for 802.11g AR315W

Reviews:

Related manuals for 802.11g AR315W

Brands by name

Popular brands