Airless DP6825, Operating Instructions Manual

Page: 11 / 22

DP-airless Page 11 of 22
Startup
1. First be sure the ON/OFF switch is OFF.
2. Adjust Pressure Regulator Valve 9# counter
clockwise to lowest pressure.
3.
Place the suction hose 3# into the coating
barrel.
4. Pull up the Prime Spray Valve 2# into A :
Prime position. (see picture below)
5. Place the suction hose 3#
into the coating barrel.
6. Plug sprayer in a grounded
cable socket.
7. Switch ON the machine
。
8. Turn the Pressure Regulator
Valve 9# clockwise, till the fluid is circulating
in the prime tube (4#)
9. Turn power switch OFF.
10. Transfer suction tube to paint pail and
submerge suction tube
in paint.
11. Turn power switch ON.
12. When you see paint coming out of prime
tube:
(1). Point gun into waste pail.
(2). Unlock gun trigger lock.
(3). Pull and hold gun trigger.
(4). Turn Prime/Spray valve to
B : SPRAY
position.
13. Continue to trigger gun into waste pail until
you see only paint coming out of gun.
14. Release trigger. Engage trigger lock.
15. Transfer prime tube to paint pail and clip
prime tube to suction tube.