17
The default setting for the unit is “Moderate” and will be displayed as four bars on the control panel.
This setting should meet air purification needs in most environments.
The art of purification
®
4. Power/Speed: When the air cleaner is turned off, the Power Off indicator will display as red, and the
fan speed indicator will be off. To turn the system on, rotate the Power/Speed knob counterclockwise or
clockwise to select a speed from 1 to 5. The default speed for AG600S starts from “1”. The light
indicator for the selected speed will display as white and the speed you selected will display on the
left-hand side of the panel, while the Power Off LED indicator light is off. To turn the system off, rotate
the knob to the “Power Off” position. The Power Off LED indicator will display as red, and the light
indicator for the fan speed will turn off.
5. IR: This infrared receiver is used by your remote control to change unit settings.
For advanced users only:
Titanium Pro
®
Advanced Function Setting
Model AG600S Radon Air Cleaner includes the Titanium Pro
®
module.
If your unit has been installed with the Titanium Pro
®
module, the light bulb icon will display on your
control panel. The light bulb serves to indicate whether your unit has the module installed, and
also indicates when it is time to replace the module by blinking.
The Titanium Pro
®
module is designed to last 6000 hours. When that time is up, the light bulb icon
will start blinking. After you replace the filter and press the Reset button (on the right-hand side of
the panel), it will stop blinking.
If desired, the Titanium Pro
®
module can be turned off.
1. With the power turned on, press the Mode button and hold down for more than five seconds, the
light bulb indicator on the LCD display will start blinking.
2. When the light bulb is on, press the Mode button again to turn on the Titanium Pro
®
module.
3. When the light bulb is off, press the Mode button to turn off the Titanium Pro
®
module.
1.
Control Setting
2.
1. Make sure the unit is powered on (plug in the unit and confirm the knob is at the “Speed 1 to 5”
position).
2. Press and hold the Timer button for more than 5 seconds, you will hear a “ding” sound and the Control
Setting bars will cycle through High, Moderate, Low, and Moderate, and then start blinking.
