3.3
RESETTING THE AIR CONDITIONER
If the remote control fails, the internal unit has a manual reset devise.
Remove the protective cap.
Select a terminal screwdriver and enter the opening gently.
To switch off the unit, press the internal button once.
To turn on the unit, press the button once again,
and the unit will start once again in the last function
That the unit was last set to.
Before carrying out maintenance the equipment must be disconnected from the mains power supply.
The only maintenance you should carry out is cleaning the indoor unit and the air filters, all other
maintenance should be carried out by a qualified service engineer.
Cleaning the filters is in necessary to keep the unit running efficiently. Clean the filters at least every week.
1.
Extract the filter by pulling the handle down underneath the unit (see diagram below), until it is
completely out. As the filter has three different compositions, the cleaning operations should be done
as follows:
2.
Extract the filters B/C from their case.
3.
Clean the B/C filters only with a vacuum cleaner, paying the maximum attention.
4.
Clean the A filter by washing it with warm water (max 40 degrees C) and neutral detergent.
5.
Rinse with water only and let it dry in a shadowy place (do not expose it to direct sun rays.)
6.
When the filter is perfectly dry, insert it back together with the other filters in their original position.
7.
Insert the filters inside the unit until they are perfectly blocked.
It is advisable to change the Filters B & C during the annual ordinary maintenance
Do not use the air conditioner without filters:
There is risk of serious damage to the unit.
How to proceed.
Filters Cleaning:
4.1
INTERNAL UNIT MAINTENANCE.
How to proceed:
ATTENTION:
4.
MAINTENANCE
15
A
B
C
Antibacterial filter
Electrostatic filter
Catalytic filter
CALL THE AIRFORCE HELP LINE FOR TECHNICAL ASSISTANCE 0845 300 2577
