background image

 

1.8 

Operational area  
- Appropriate use: 

QuietAir  150  fans  are  used  to  convey  normal  or  slightly  dusty  (particles  size  <  10 
µm),  little  aggressive  and  humid  air,  into  moderate  climate  and  suitable  area  of  its 
performance  curve  (see  Airflow  Developments  sales  documents  /  Internet). 
Operation  permitted  only  for  fixed  installation  within  buildings.  Maximum  permitted 
medium  and  ambient  temperature  is  40ºC.  QuietAir  150  fans  conform  to  enclosure 
protection  IP45,  protection  class  II  and  according  to  VDE0100  part  701  shall  be 
conformed to install in area 1 of humid areas.     

 

 
 
 
 
 

 
 
 
 
 
 

 

- Rationally foreseeable misuse 

The  fans  are  not  suitable  for  use  under  difficult  conditions  such  as  high  humidity, 
aggressive  media,  longer  downtimes,  strong  pollution,  and  excessive  workload  due 
to climatic, technical or electronic influences. The same applies for the mobile use of 
the  fans  (cars,  aircrafts,  ships,  etc.).  To  perform  under  these  conditions  is  only 
possible with release approval by Airflow Developments, in case of standard version 
it is not applicable. 

 

 

- Prohibited use

  

Misuse of the device is not allowed! Solids or solid impurities > 10 µm in transporting 
medium  as  well  as  liquids  are  not  allowed.  Transporting  medium  which  are 
aggressive against the fan material as well as abrasive media is not allowed. Usage 
of the fan in the explosive environment is prohibited.    
 

 

1.9 

Performance data 

The device type plate is binding for the electrical data; this must be conformed to the 
local supply network.  On the test stand fan performance was complied with DIN EN 
ISO 5801. 
         

 

1.10 
 

Noise data  

The noise data which relate to distances is valid under free field conditions.  
After  installation  the  sound  pressure  level  can  vary  significantly  from  the  catalog 
values  since  it  strongly  depends  on  the  installation  conditions,  for  instance  the 
absorption capacity of the room, the room size etc. 
 

CHAPTER 2 
 

GENERAL NOTES

 

2.0 

Qualification of staff 

 Maintenance and installation work must be carried out only by an approved 

electrician. 

QuietAir  150  fans  should  not  to  be  used  by  children  and  persons  with  reduced 
physical,  mental  or  sensory  capacities,  without  proper  practical  experience  or 
expertise,  unless  they  are  controlled  or  instructed  on  the  product  operation  by  the 
person(s)  responsible  for  their  safety.  Children  are  not  allowed  to  play  with  the 
device.  Cleaning  and  maintenance  must  not  be  carried  out  by  children  without 
supervision.  

 

 

 
 
 

2.1 

 
 
 
 
 
 

Touch protection 

-  QuietAir  150  fans  are  supplied  with  a  standard  suction  side  protective  grid. 
Depending on the installation conditions protection against accidental contact on the 
discharge side may also be required. Appropriate protective grids are available as an 
accessory.   
- According to the installation method (for instance installation in ventilation canals or 
covered aggregates) fans are already protected and in such cases they do not need 
a  protective  grid.  It  should  be  noted  that  the  operator  is  responsible  for  compliance 
with the current requirements and is liable for accidents. 
 

 DANGER

 

Summary of Contents for QT 150VS





















Reviews: