11
- Length of individual wires 135 mm
- Wire stripping 8 mm
- Strip the non-metallic sheathed cable which
sits flush with cable duct
1. Terminal compartment cover put on the
plastic housing and screw tight
2. Fit and snap in the cover
6.5
Mounting
6.6
Operation
Safety instructions listed in Chapter 1.2 must be observed!
To guarantee the proper function of the fan, the following should be checked regularly:
- Appearance of dust or dirt in the housing (on the motor and impeller)
- Free rotation of the impeller
- Appearance of excessive vibration and noise
In case of problems with one of the points listed above maintenance should be carried
out according to the instructions in Chapter 8.
DANGER
Fig 8
Fig 9
Fig 10
Fig 11
