background image

  

Warranty: 

 

 

Applicable to units installed and used in the United Kingdom 
 
Airflow guarantees the Aura eco-air for 2 years. The guarantees can be upgraded 
to 3 years upon registering on our website airflow.com from date of purchase  
against faulty material or workmanship.  
 
In the event of any defective parts being found, Airflow Developments Ltd reserve 
the right to repair or at our discretion replace without charge provided that the unit 
 
1. ) Has been installed and used in accordance with the fitting and wiring  

  instructions supplied with each unit. 

2. ) Has not been connected to an unsuitable electrical supply. 
3. ) Has not been subjected to misuse, neglect or damage. 
4. ) Has not been modified or repaired by any person not authorised by  

  Airflow Development Ltd 

5. ) Has been installed in accordance with Building Regulations  

 (IEE wiring regulations). 

 

Airflow Developments shall not be liable for any loss, injury or other consequential 
damage, in the event of a failure of the equipment or arising from or in connection 
with the equipment excepting only that nothing in this condition shall be construed  
as to exclude or restrict liability for negligence

 

This warranty does not in any way affect any statutory or other consumer 
rights 
 
 

 

 
 

Airflow Developments Ltd 
Aidelle House, Lancaster Road 
Cressex Business Park 
High Wycombe 
Bucks. HP12 3QP 
 
Tel:  +44 (0) 1494 525252 
Fax: +44 (0) 1494 461073 
E-mail: [email protected] 
Web:   airflow.com 
 

 

Summary of Contents for Aura-eco












Reviews: