9
© Airflow • We reserve the right to make changes without prior notice
BASIC SETTINGS
DEPLOYMENT WIZARD
SWITCHING THE UNIT OFF
If you want to switch off the ventilation unit, proceed as follows:
1. Select
Settings
> Turn unit
OFF
.
2. Press the
OK
button.
3. The system asks for confirmation.
4. Press the
OK
button.
5. The ventilation unit is now switched off.
NOTE
However, it is recommended that the ventilation be kept turned on
without disruptions.
NOTE
The first launch of the unit may take a while, as the control panel
will format its software and verify that it has the latest software
version.
UPDATING THE UNIT SOFTWARE
Disconnect the ventilation unit from the mains electrical supply.or
turn off the fuse. Connect the computer to the digital controller of
the ventilation unit using a USB MicroB connector.
Start the ventilation unit. A USB sign will appear on the display of
the control cannot be used when it is connected to the computer.
Transfer the update file you have downloaded onto the ventilation
unit. Copy the update file HSWUPD.
BIN (Please note! Do not alter the file name!) you have downloaded
at the root of the control panel (the control panel will be displayed
on your computer as a mass memory or a removable disk drive).
When the file has uploaded onto the control panel, remove the USB
cable.
Next, the control panel will take a while to load the update.
The control panel will now start to load the update file onto the
motherboard. This can take several hours. The control panel will
remain turned on, but it is recommended that the control panel be
not used during that time.
When the update is ready, the unit will restart automatically is
ready, the unit will restart automatically.
DV245
(Integral CO
2
Sensor)
