12
DEPLOYMENT WIZARD
EXPERT SETTINGS
PASSWORD AND ACCESS LEVEL
Once you have finished up the basic settings, the deployment
wizard moves on to setting the system password.
NOTE
If you set the password as 0000, the password inquiry is not used.
1. The deployment wizard Password and access level screen is
opened.
2. Set the first digit of the password by using the
Up arrow
and
Down arrow
buttons. Proceed to the next digit by pressing the
Right arrow
button.
3. Set the second, third and fourth digit in the same manner as
the first digit.
4. Press the
OK
button.
5. The password is now set.
USER LEVEL
There are three user levels:
• Extensive
— At the extensive user level, the user can access
every menu on the control panel.
•
Normal
— At the normal user level, the user's access to some
menus is restricted.
•
Limited —
At the limited user level, the user has access only
to the basic functions of the ventilation units
.
For more information on user levels, see chapter 9, User level
diagrams. When you want to set the system user level, proceed as
follows:
1. The deployment wizard User level screen is opened.
2. Use the
Plus
and
Minus
buttons to set the user level.
3. Press the
Right arrow
button.
4. The user level is now set.
PARENTAL CONTROLS
Parental control locks the digital controller, protecting the units
settings. When you want to set the system child lock, proceed as
follows:
1. The deployment wizard Password and access level screen is
opened.
2. Set the parental controls on or off by using the
Plus
and
Minus
buttons.
3. Press the
OK
button.
4. The parental controls are now set.
ENTER THE NEW
PASSWORD HERE:
PARENTAL CONTROLS
ACCESS CODE:
1 0 0 1
DV245
(Integral CO
2
Sensor)
