Uno hab Ext. Wall Ins. Vent Kit
Installation and Operating Instructions
4
© Airflow
-
we reserve the right to make changes without prior notice
m
DANGER
m
WARNING
m
CAUTION
m
DANGER
1.0 IMPORTANT INFORMATION
In order to ensure complete and effective operation and for your own safety, all of the following instructions should
be read carefully and observed.
This document should be regarded as part of the product and as such should be kept accessible and durable to
ensure the safe operation of the fan. All p
roduct
-related safety regulations must be observed.
1.1 Warning instructions
The accompanying symbols are safety-relevant prominent warning
symbols. All safety regulations and/or symbols in this document must
be absolutely adhered to, so that any risks of injury and dangerous
situationsare avoided!
1.2 Safety instructions
Special regulations apply for use, connection and operation; consultation
is required in case of doubt. Further information can be found in the relevant
standards and legal texts.
With regard to all work on the fan, the generally applicable safety at work
and accident prevention regulations must be observed! The following
points must be observed:
• When creating the wall opening, protect the installation site/ building
exterior against falling brickwork. Install protective cover!
• Remove objects from the immediate vicinity of the building exterior.
1.3 Area of application
– Intended use:
The wall installation units
Uno hab
are intended for external building wall installation. The air outlet is in the window
soffit through a stainless steel wall grille. A lockable plastic panel serves this purpose on the internal side of the wall
with an integrated non-woven air filter class G3 and sound insulation. In order to ensure balanced ventilation, at least
2 units, which operate in
modes
with regard to operating
mode
(supply air/extract air), are required for one residential
unit. Depending on the overall ventilation requirement of the residential unit, more than 2 units are normally installed
and the individual volume flows are automatically adjusted by means of the central control unit.
The standard equipment allows installation and use in frost-free rooms >+ 5 °C.
When operating under difficult conditions, such as high levels of humidity, long standstill periods, excessive loads
and climatic, technical or electronic influences,
seek approval from Airflow technical services
, as the standard
version is not suitable for this.
Any use other than the intended use is prohibited!
– Reasonably foreseeable misuse:
Ventilation units
Uno hab
are not suitable for operation under difficult conditions, such as high levels of humidity,
aggressive media, long standstill periods, heavy contamination, excessive loads due to climatic, technical or elec-
tronic influences. The same applies for the mobile use of fans (vehicles, aircraft, ships, etc.). Usage under these
conditions is only possible with approval from Airflow, as the standard version is not suitable in this case.
– Improper, prohibited use:
Improper, prohibited use:
Any use other than the intended use is not permitted! The conveying of solid matter or solid matter content > 10µm
in air and liquid is not permitted. Transport media, which affect the materials of the fan, and abrasive media are not
per- mitted. Use in explosive atmospheres is not permitted!
1.4 Personnel qualification
m
DANGER!
The electrical connection and start-up must only be carried out by qualified electricians.
Installation, servicing and maintenance of the fan must only be carried out by qualified electricians.
Uno hab
individual room ventilation units can be used by children over the age of 8 as well as persons with
physical, sensory, or mental disabilities or lack of experience and knowledge, if they are supervised or instructed with
regard to the safe use of the unit and they understand the resulting risks. Children must not play with the unit.
Cleaning or user maintenance must not be carried out by unsupervised children.
CHAPTER 1
SAFETY
m
DANGER
m
NOTE
