Airflow Instruments PAN300 Series, Operation And Service Manual

Page: 9 / 40

Unpacking and Parts Identification
3
The following two instruments should be used in conjunction with the
PANDA unit:
TA465-P Multi-
function Instrument Refer to TA465 Operation and
Service Manual supplied with the
instrument for additional parts
supplied as standard.
PVM620
Micromanometer Refer to PVM620 Operation and
Service Manual supplied with the
instrument for additional parts
supplied as standard.
IMPORTANT
—
Read Before Using the PANDA for the First Time
It is IMPORTANT that the PANDA be connected to the power supply
using a 30 mA residual-current device (RCD) or Ground Fault Circuit
Interrupter (GFCI).
It is IMPORTANT that the 110V PANDA (yellow power socket) be
connected only to 110V to 120V supplies. Connecting it to a higher
voltage supply will permanently damage the inverter.
The 220V/240V PANDA (blue power socket) should only be
connected to 200V to 240V power supplies.
When storing the PANDA in a vertical position, please ensure that the
straps holding the instrument box are in place and tightened first.
The PANDA is designed so that the instrument box and duct carry
tube are removable to lighten the load when lifting.
DANGER
Turn the isolation switch to the OFF position and wait 10 minutes
prior to disconnecting power.