Cleaning
Press on the spray trigger
(2)
Figure 4
, and place the water or the mixture on the
surface to be cleaned by directing the spray (10) in its direction. You can turn around
the device by grasping handle
B
, and then you can rub your smooth surface with
either one of the 2 wipes.
Once this is done you return your hand to handle
A
and suck the water through the
scraping joint
(4)
by scraping up and down while maintaining the suction control
(1)
at
on position
Figure 5
. It is not necessary to press too hard on the device during the
finishing scraping operation.
Sometimes a slight grip is necessary to achieve best
results.
Do not project spray to eyes with or without product, or on surfaces of
electronic components, such as plug, switch, cable, stereo equipment, computer
screen, or household appliances.
Replacing the water tank
The dust and dirt is left on the cloth and the residual water is sucked for recycling.
Generally, it is not necessary to change the water in the tank too often during use. You can,
depending on the state of cleanliness of the surfaces. Recycled water may have a little
color but will not affect the result of expected cleanliness.
