18.
Do not use the mop without placing the cleaning pad over the mop head. Do not use
the mop when the water tank is empty.
19.
Be
extra
cautious when using the steam mop on stairs.
20.
S
tore the device in
an
upright position in a cool and dry place.
21.
When using the mop, make sure that the surface to be cleaned is well lit.
22.
Never pour any cleaning solutions into the water tank
as it
can
damage the device.
23.
Never block the steam nozzles. Never use the mop on soft surfaces because the
steam
nozzles may get blocked. Always clean the steam nozzles by removing all the fuzz,
hair
etc.
24.
Use only the attached accessories recommended by the manufacturer.
25.
Never direct the steam towards people or animals.
26.
Do not use the steam mop on unprotected wood surfaces. The hot steam may remove
the wax when you use the mop on waxed surfaces. Never leave the mop running on wood
surfaces for a long period of time.
27.
Be careful when using the mop on vinyl floors, linoleum or any temperature-sensitive
surfaces. Always test the mop on a small floor area in an inconspicuous place. Before use,
read the floor manufacturer's instructions for cleaning to make sure that the surface may
be
steam-cleaned.
28.
The steam mop may be used for disinfecting floors in the bathroom, kitchen, shower,
etc. To disinfect the area, hold the running mop on the surface being cleaned for at least 8
seconds but no longer than 15 second.
29.
Leaving the steam mop running in the same spot without moving it for longer than
recommended may result in accumulation of sediment. The sediment can be removed with
a descaling solution or a few drops of vinegar.
30.
Steam mop should be used only on sealed floors.
5
CLEANING AND MAINTENANCE
1. Before cleaning unplug the mop from the power outlet.
2. Microfiber cloth pad can be washed in the washing machine. Steam mop should be
used only with a microfiber cloth pad from the manufacturer.
3. Wipe the mop with a rug. Never immerse the unit in any liquid/water.
4. At least once a month, clean off the dirt /sediment from the steam mop.
TECHNICAL DATA:
Power source:
Power:
220-240V ~50Hz
130
0W
