ASSEMBLY AND
USAGE
1.
Attach the head to the body.
2.
Insert the handle
into the body.
3.
Place the microfiber cloth
pad
on the head and fasten it by pulling
the cord.
4.
When using
your
steam mop on carpet
,
place the head on the
glider.
CAUTION! Never use steam mop without the microfiber
cloth pad on.
5.
To remove the water tank
,
push it up and detach
from the body.
6.
Pour two measuring cups
of water into the water tank
.
The
maximum capacity for the water tank is 800ml.
Note: Never overflow
the water tank as it can cause water leakage.
7.
Twist the upper cord wrap clockwise
. U
nw
ra
p the power cord and
plug it into a grounded outlet.
8.
Slowly pass over the surface to be cleaned
,
pressing the trigger to
release steam when needed. It is recommended to sweep or vacuum
floor prior
to
using steam mop.
9.
When you are done using the
steam
mop
,
unplug the power cord
from the outlet, empty the water tank and carefully remove the
microfiber cloth pad.
WARNING! The microfiber cloth pad can be very hot.
3
