1 -‐ ChargAIRE
1 -‐ Carry bag
3 -‐ Fins (a5ached to the fin bases)
1 -‐ Repair kit
Items Needed
:
1 -‐ ChargAIRE
1 -‐ Vinyl tube valve adapter
1 -‐ Leafield valve adapter
1 -‐ Pump (not included)
Inflate the SUP using a hand, foot or an electric pump designed for inflatable boats. If
using an electric pump for iniLal inflaLon, a hand pump must be used to top off the
board.
1. Remove the dust cap from the valves.
2. Push and turn the valve stem 1/4 turn to the leQ. This posiLons the valve stem in the up
or closed posiLon. Having the valve stem in the closed posiLon allows air to be pumped
into the chamber and will prevent the air from escaping.
3. Connect the clear vinyl valve adapter to the pump hose and to the Leafield valve adapter.
4. Screw the Leafield valve adapter into the valve on the SUP.
5. Inflate the board chamber to a pressure of 8 psi. This pressure will not allow much
deflecLon. Inflate the outer collar chamber to 2.5 psi or unLl the chamber feels Lght.
Set Up - Step 1 - Inflation:
Items Needed
:
1 -‐ Inflated SUP board
3 -‐ Fins (A5ached to fin bases)
ChargAIRE Includes:
BEFORE YOU BEGIN...
Check for damaged or missing parts.
1 -‐ Vision bag
1 -‐ Vinyl tubing valve adapter
1 -‐ Leafield valve adapter
1 -‐ Valve wrench
1 -‐ Repair thread
Repair Kit Includes:
Pump
Tool Needed for Assembly:
Set Up - Step 2 - Fin Installation:
1. Slide the front of the fin into the fin base.
2. Push down on the back of the fin to
posiLon into place.
3. Secure fin into place with the a5ached fin
plug.
4. Repeat on remaining fins.
1 -‐ 5 -‐ 10 pound anchor & rope
4 -‐ Frameless mount pads for IGSystem
1 -‐ Frameless fly rod holder
Optional Accessories (Not Included):
1 -‐ Repair needle
2 -‐ Tear-‐aid prep pad
3 -‐ Tear-‐aid Type A patches
1 -‐ Fin plug
1 -‐ Split ring
