Aire ChargAIRE Manual Download Page 5

www.aire.com

 ~ 800-247-3432

Adhesive Patch Repair

Items Needed

:

Towel   
Type   A   Adhesive   Patch   
Alcohol   Prep   Pad   
Tear   Aid   InstrucLon   Sheet

For   most   repairs,   the   airecell   does   not   need   to   be   removed   completely.   
1. Locate   the   hole   in   the   board   and   access   that   area   of   the   airecell   and   outer   skin   by   opening   the   zipper.   
2. Using   a   towel,   dry   the   area   to   be   worked   on.   
3. Clean   area   to   be   worked   on   with   alcohol   prep   pad   and   let   the   area   air   dry.   
4. Peel   backing   paper   off   Type   A   Adhesive   Patch   and   apply   patch   over   punctured   area.         
   

(See   Tear   Aid   instrucLon   sheet   for   more   details.)   

5. Press   and   rub   patch   so   that   the   patch   seals   completely   and   is   without   bubbles.

Warranty

5   Year   Limited   Warranty   
What   this   Warranty   Covers:   The   Five   (5)   year   limited   warranty   covers   retail   purchases   against   manufacturing   defects   in   materials   and   workmanship.   
This   warranty   covers   the   tubes,   D-­‐rings,   AIREcells,   valves   and   zippers   to   be   funcLonal   and   water   worthy   

What   this   Warranty   Does   Not   Cover:   The   5   year   limited   warranty   does   not   cover   damage   caused   by   normal   board   use,   cosmeLc   wear,   excessive   UV   
damage,   abnormal   abuse,   neglect   and/or   inappropriate   storage.   This   warranty   can   be   void   if   the   board   is   structurally   altered   or   used   commercially.   

The   Period   of   Coverage:   Your   board   is   covered   from   the   original   purchase   date   for   a   period   of   five   years.      

Disclaimer   

AIRE   is   not   liable   for   any   injury   or   mishap   sustained   by   the   use   of   any   AIRE   or   Tributary   product.      The   user   acknowledges   inherent   risks   and   waives   
any   and   all   claims   against   AIRE,   Inc.   and   any   of   its   agents.   

If   you   have   any   quesMons,   please   contact   your   nearest   dealer   or   

AIRE,   2021   E.   Wilson   Lane,   Meridian,   ID   83642,   800-­‐247-­‐3432   

Thank   you   for   choosing   AIRE   products.

   

Extensive Repairs

If   you   have   a   major   rip   or   tear   in   your   board   that   is   beyond   your   abiliLes   to   repair,   please   contact   Outcast   at   800-­‐247-­‐3432   for   a   
Return   AuthorizaLon   (RA)   number.      Please   put   a   brief   note   with   your   contact   informaLon   and   a   detailed   descripLon   of   the   repairs   
necessary   inside   the   box   and   ship   the   package   to   the   address   below   with   the   RA   number   clearly   wri5en   on   the   outside   of   the   box.      For   
your   protecLon,   please   ship   the   board   with   a   service   that   provides   a   tracking   number.

Summary of Contents for ChargAIRE






Reviews: