Aircraft Modelers Research Giant Stick 85, User Manual

Page: 63 / 77

63
160-) Prepare a skin between ribs W1 up to
W4. Repeat for the other side. See next
picture.
161-) Now is a good time to mark your top
skin to allow the insertion of a small piece of
cardboard servo lead tube for the wing bolts
(top section only) Bond the skin in place
afterwards.
162-) Bond the ½’’ x 1 ½’’ leading edge
(scarf required) and shape to the contour
of ribs W1/W14 as reference.
163-) Add two small 1/8’’ balsa skins over
the wing tip part T1, top and bottom.