Aircraft Modelers Research Giant Stick 85, User Manual

Page: 23 / 77

23
21-) Using epoxy, bond at 90-degrees to
the floor the F3/F4 assembly, GP, F2 and
one single F2A over the fuselage floor.
22-) Bond F5 through F9 at 90-degress to
the floor. Also bond a 3/8’’ square by 33 ¼’’
long balsa stick on each sides of the floor
and against each formers.
23-) The balsa sticks go from FD1 up to
FD4. Bond one servo lead paper tube
as shown.
24-) Dry fit both fuselage sides to the centre
section. Do not bond yet. Trial fit only.