07
3. Bolt the gear cover plate in place using the single bolt provided and the hole in the center of the gear.
If you have purchased the Extra 300, main gear cuffs are provided. Slide these over the ends of the gear
and screw into place using 4 small wood screws as shown in the pictures below.
4. Install the main wheel axles to the composite landing gear and tighten the nylon-insert lock nut. Install
one wheel collar onto the axle. Use a second wheel collar as a guide to leave a gap on the inboard of the
axle. Use a small drop of thread-lock and tighten in place. Slide the wheel onto the axle and install a
second wheel collar also using thread-lock on the set screw.
