13
installation. The author prefers to protect the ignition wires with cable wrap to prevent wear of the mesh
shielding.
4. Mount your ignition battery securely to the engine box. A typical location is on the side or top of the
engine box. The ignition switch should be mounted to the fuselage side wall just behind the cowling.
Secure all cable connections neatly and firmly.
5. Assemble the throttle servo mount using the supplied laser cut parts. This mount can be used if you
are using an engine with a rear carb such as the 85 cc engines. The typical location for this mount is
glued to the right side of the inside motor box as far aft as possible (see the photo above). Make sure you
do not have any the ignition module close to this servo. Alternatively, there is a servo cutout in the
bottom of the engine box for 100cc engine users. Mount your throttle servo and complete your linkage
setup.
