YOKO & YOKO+ | User’s manual
4
3. SOFTWARE SETUP
The SWITCHO TRIMS interacts with any computer using
our own custom protocol through VFHub, which makes it
compatible with MSFS, Prepar3D
V4-V5
and X-Plane 11. VFHub
is the software developed by Virtual Fly to simplify setting
up our products. With VFHub, you can fly your favorite flight
simulation software without worrying about configuring your
Virtual Fly flight controls.
You can download the latest VFHub version from this link:
https://www.virtual-fly.com/setup-support
takes care of installing VFHub and all the required modules.
VFHub is compatible with MSFS, Prepar3D
V4-V5
and X-Plane 11.
After installing VFHub, make sure your SWITCHO TRIMS
is connected to your computer. Run VFHub, locate the
SWITCHO TRIMS section in the Dashboard and select the
device’s options button ( ) to access the SWITCHO TRIMS
settings screen.
VFHub takes care of making your SWITCHO TRIMS work with
MSFS and X-Plane 11, so it
must always be running
when you
use the SWITCHO TRIMS.
Inside the SWITCHO TRIMS settings screen,
you must select the COM port to activate your
SWITCHO TRIMS
. For detailed instructions on
getting your device running,
check the USER’s
MANUAL button in the VFHub software.
To
customize
how your SWITCHO TRIMS works,
select the
device’s options button
( )
in
VFHub’s
Dashboard
.
For detailed instructions on all the
tuning and customization possibilities,
check the
USER’s MANUAL button in the VFHub software.
