![background image](http://html1.mh-extra.com/html/airborne-windsports/edge-xt-582-l-cruze/edge-xt-582-l-cruze_operating-instructions-manual_2876049053.webp)
©
A
ir
B
orne
W
ind
S
ports
P
ty.
L
td.
SECTION 4
Aircraft Operating Instructions Edge XT 582 / Cruze
NORMAL PROCEDURES
May 2007
Issue 2.0
Page 7
4.2.9
Locate Nose Battens
Insert both nose battens tail end first. Locate the front of the
batten on the alloy stubs on the front of the keel tube.
Figure 9 Section 4. Locate Nose Battens
4.2.10
Install Nose Fairing
Attach the nose fairing by applying the top Velcro first then gently tension
over the nose plates and attach the Velcro to the undersurface.
Figure 10 Section 4. Install Nose Fairing
4.2.11
Insert Remaining Main Sail Battens
Insert remaining main sail battens at the tips.
4.2.12
Insert Undersurface Battens
The undersurface battens should be inserted as far as possible, without
forcing them. The batten should then be pushed with your thumb so that
the end is inside the pocket. Use the string to pull the batten back to the
rear of the pocket.
Figure 11 Section 4. Insert Remaining Sail Battens