12
13
1
Air is drawn in through the openings underneath the unit.
2
The air is purified by E11 filtration which stops up to 99.97% of particles with a diameter
greater than or equal to 0.3 μm.
3
Odours are eliminated by the activated carbon on the filter.
4
The purified air is then distributed from the top of the unit, thanks to the fan.
OPERATION PRINCIPLE
1
Cover
2
Purified air outlet
3
ON/OFF button
4
Indicator light
5
Power supply
6
Con cotton for the diffusion of
essential oils
7
Filter E11 + activated carbon
8
Body of the device
9
Air inlets
10
Ionizer
11
Fan
COMPONENTS (SEE PAGE 2)
USE PRECAUTIONS
1. Connect the device to the electrical outlet or via USB.
2. Press the ON/OFF (
3
) button to turn the unit on.
3. Press the ON/OFF button again to turn off the LED pilot light.
4. Press a third time to turn Buldair off.
OPERATING INSTRUCTIONS
• Make sure that the product is placed on a dry flat surface.
• Leave at least 50cm behind, around and in front of the appliance.
• Make sure that the filter and cover are correctly positioned and pushed in.
• Never operate the appliance without filter!
NEGATIVE IONIZATION
AROMATHERAPY
Negative air ionization improves air quality and helps prevent stress and anxiety. Thanks to this
function, Lendou emits between 3 and 8 million negative ions per second, which effectively
regenerates the air of a room. The diffused negative ions are subject to an electrostatic
phenomenon: they are attracted by the particles suspended in the air and are fixed on them,
then dropped to the ground. So, the air is purified.
Buldair has an aromatherapy function.
1
Make sure the unit is disconnected, then remove the cover from the unit.
2
Remove the cotton from the polypropylene receptacle.
3
Apply 3 to 10 drops of essential oil to the cotton.
4
Replace the cover. Reconnect and turn the unit on again.
• Make sure the unit is turned off and unplugged before any manipulation.
• Do not immerse the device in water or any other liquid.
• Do not use corrosive, abrasive or flammable products to clean the unit.
• The particulate filter is not washable and needs to be replaced.
CLEANING THE DEVICE
Clean the device with a soft, damp cloth.
FILTER REPLACEMENT
The life of the filter depends on the frequency of use of the device and the concentration of
pollutants in the air. It should be replaced about every 6 months.
1
Make sure the unit is unplugged, then remove the unit cover and filter.
2
Place the used filter directly in a bag and throw it quickly to avoid dispersing contaminants.
3
Install the new filter,
4
Replace the cover. Replug and turn the unit on again.
Avoid used filters being handled by people with asthma or allergies. Remember to wash your
hands after handling a used filter.
STORAGE OF THE DEVICE
If you don’t use your air purifier, you can store it in a clean place, away from moisture and heat.
MAINTENANCE AND FILTER REPLACEMENT (SEE PAGE 3)