31
Problems & Solutions:
Problem: None of the LCD or Control Panel functions light up.
Solution: Check that the power cord is plugged in and/or that the
electrical socket is functioning properly.
Problem: Water from the water ionizer dispenses too slowly or
irregularly in spurts or sputters.
Solution: a) Check hoses, valves, and connections to make sure
they're not obstructed; b) check to see if the water filter needs to be
replaced, and/or c) if you live in a cold climate, make sure neither
your source water or water in the ionizer has frozen.
Problem: Alkaline water output appears initially cloudy or milky.
Solution: This is generally a temporary anomaly caused by harmless,
nontoxic hydrogen production as part of the electrolysis process.
The cloudiness will disappear on its own after a few seconds and
will not affect the taste of your drinking water. It can also happen
because of extremely high levels of calcium and magnesium in
your source water (known as "hard water") when ionizing higher pH
levels. This phenomenon is also harmless and will not affect the
taste of drinking water. However, you can reduce the instances in
which the cloudiness occurs by a) lowering the pH level or b)
increasing the water flow rate through the unit
Problem: White particles begin to appear in your alkaline water and/or
on the walls of the filter chamber.
Solution: Hard water high in calcium and magnesium can cause this
type of particle buildup. Though the particles are harmless and do
not affect taste, you can reduce or eliminate them by descaling
your water ionizer more frequently.
Problem: The rate water is dispensed through the Flexible Metal
Spout begins to diminish over time.
Solution: This is generally caused by, calcium and magnesium
deposits from extremely hard water building up over time along the
inside of the spout. Proper or more frequent descaling and/or
soaking the spout directly in descaling solution will normally
alleviate this problem.
Problem: The rate at which water is dispensed appears to slow down
immediately following replacing the Inner Carbon Filter.
Solution: This is generally an indication that there is still some residual
air trapped in the water filter. Turning your faucet on high and
allowing water to flow through your ionizer at a high rate of speed
for 3 or 4 minutes will usually solve the problem.
Owner’s Manual: AirWaterLife.com Aqua-Ionizer Deluxe 9.0
