Air Uno Diamond 60, Installation & User'S Instructions

Page: 12 / 28

12
5.10.7 Switching Off the Timer
To cancel the operation of the timer, select the time
value of
“00” using the [ - TIMER] key or by pressing
the [+TIMER] and [ - TIMER] keys at the same time.
Fig 20
5.11 Auto Keylock
When all the zones are not powered, and one zone
is at zero power level, the keylock function is
activated after 1 minute.
5.12 Displaying Software Versions
•
During the first 30 seconds after plugging in the
appliance.
•
The touch has to be unlocked and all zones are
off.
•
Press at the same time the left and right zones
[
- ] keys and the keylock key.
A beep sounds and the zone displays show the
software version in hexadecimal format. The
software version is composed of two parts:
functional part and safety part. To distinguish
between the two parts, the dots of the displays are
activated for the safety version.
Fig 21
The message is kept for 10 seconds or until any key
or combination of keys are touched. When the
message disappears a beep sounds and the user can
continue with normal operation.
The induction microcontroller software version is
shown by pressing at the same time the left and
right zone [+} keys and the keylock key.
Fig 22
6. Installation
6.1 Safety Instructions
•
Before beginning any cleaning or maintenance
operation, unplug the appliance or switch off
the electric mains.
•
The duct of the extractor must not be
connected to a duct used for the discharge of
fumes coming from appliances with non
-
electrical energy (e.g. gas heaters or boilers) or
in ducts for the circulation of hot air.
•
If the duct version of the extractor is used it is
advisable to ventilate the room during use.
•
Check that the mains voltage is equal to that
shown on the label placed inside the extractor.
•
Ensure that the electrical supply is correctly
earthed.
•
If the wire connecting to the mains is damaged
it must be replaced by the manufacturers
technical service e or in any case by a properly
qualified electrician.
•
These operating and installation instructions
must be read in full before you assemble the
device and start to use it.
•
Make sure that the room is sufficiently
ventilated to the outside air if in recirculation
mode, e.g. through an open window.