A
Hygrosmart
®
Function
B
Clothes dryer mode
C
Night mode
D
Negative ionisation function
E
“Full tank” alert
F
Display of the humidity rate of room air:
• Between 40 and 60%, the display is green to indicate an ideal
humidity rate.
• Below 40%, the display is blue to indicate a too dry air.
• Above 60%, the display is red to indicate a too humid air.
Make sure that the product is placed on a dry flat surface. Leave at least 20cm behind, around
and in front of the appliance. Make sure that the pre-filter and the tank are correctly placed.
1. Plug the appliance.
2. Press the ON/OFF button:
• The digital display will flicker during the stabilisation time and then, it will display the humidity
rate of the room air.
• Lary automatically starts in
HYGROSMART
®
FUNCTION
.
3. Press ON/OFF twice to select
“CLOTHES DRYER” MODE
.
4. Press ON/OFF a third time to select
NIGHT MODE
.
5. Press ON/OFF for a long time to turn the appliance off. The fan will stop after 30 seconds.
INSTRUCTIONS DE FONCTIONNEMENT
DIGITAL DISPLAY
MAIN FUNCTIONS
A
HYGROSMART
®
FUNCTION:
This mode enables you to maintain, at maximum speed, an ideal
humidity rate in the air (between 47% and 53%).
B
“CLOTHES DRYER” MODE:
In “clothes dryer” mode, the appliance works at maximum speed
until the air humidity is equal to 20%. It is the perfect mode for laundry drying which needs
significant air dehumidification.
C
“NIGHT” MODE:
Identical to the Hygrosmart
®
function, this mode enables you to maintain
the humidity rate of your room between 47% and 53%. However, the appliance works more
quietly, at low speed, and it does not produce sound signal once the tank is full.
D
NEGATIVE IONISATION FUNCTION:
This function automatically starts when you turn the appliance
on. It enables to clean the air and eliminate bad smells, thanks to the diffusion of negative ions.
A
B
C
D
E
F
10