VELTRON DPT 2500
Air Monitor Corporation
116-045-10.P65 (6/99)
VELTRON DPT 2500
- IO&M Manual
6 – MAINTENANCE
The VELTRON DPT 2500 is a solid state device having few mechanical parts requiring special periodic maintenance. The
following maintenance steps are not requirements, but guidelines for establishing a maintenance program for your specific
installation.
Operating experience should be used to set frequency of specific types of maintenance.
6.1 – CLEANLINESS
– Verify condensation (or other sources of liquids) are not present inside the VELTRON DPT 2500.
6.2 – MECHANICAL
– Verify pressure signal connections are secure.
– Inspect pressure signal lines for any cracks or leaks.
– Verify mounting hardware is secure.
6.3 – ELECTRICAL
– Periodically inspect all wiring to the VELTRON DPT 2500 for good connections and absence of corrosion.
6.4 – CALIBRATION
– VELTRON DPT 2500 should have calibration verified annually as a minimum.
SECTION 6 – MAINTENANCE
11
