4. Appendix
AirLive WN-220ARM User’s Manual
66
specific adapter. The installation steps listed below are applicable for all network
adapters.
1. Go
to
Start > Right click on “My Computer” > Properties
.
2.
Select
the
Hardware Tab
.
3. Click
Device Manager
.
4. Double-click on “
Network Adapters”
.
5. Right-click
on
Wireless Card bus Adapter
or
your specific network
adapter
.
6. Select
Properties
to ensure that all drivers are installed properly.
7. Look
under
Device Status
to see if the device is working properly.
8. Click
“
OK”
.
Q: What can I do if my Ethernet connection does not work properly?
A:
1. Make sure the RJ45 cable connects with the router.
2. Ensure that the setting on your Network Interface Card adapter is “Enabled”.
3. If settings are correct, ensure that you are not
using a crossover Ethernet cable,
not all Network Interface Cards are MDI/MDIX compatible, and use a patch
cable is recommended.
4. If the connection still doesn’t work properly, then you can reset it to default.
Q: Something wrong with the wireless connection?
A:
A. Can’t setup a wireless connection?
I.
Ensure that the SSID and the encryption settings are exactly the
same to the Clients.
II. Move the WiFi Broadband Router and the wireless client into the
same room, and then test the wireless connection.
III. Disable all security settings such as
WEP
, and
MAC Address
Control
.