Air Live WLA-9000AP User Manual Download

Page: 10 / 171

1. Introduction

AirLive WLA-9000AP User’s Manual

1.4 Feature

Compliant with 802.11a, 802.11b and 802.11g, Super A™ and Super G™ standards

with roaming capability.

Dual Wireless interfaces support multi-function modes: Dual Access Point, Dual WDS

Bridge, AP + Client Infrastructure, AP + WDS mode.

Static assignment or DHCP client to set the device IP address.

Multiple security measures: SSID hiding, Access Control List, WEP based encryption

(64, 128, 152 bits), enhanced Security with 802.1x using a primary and a backup

RADIUS Server with/without dynamic WEP keys, WPA-PSK, WPA, and WPA2.

Extensive monitoring capability such as event logging, traffic/error statistics monitoring.

Easy configuration and monitoring through the use of a Web-browser based GUI with

predefined operation mode. SNMP commands from a remote SNMP management

station and UPnP for users to automatically discover the device.

Setup Wizard for easy configuration/installation.

Configuration file download and restore.

Firmware upgradeable for flexibility to add extra features.

Summary of Contents for WLA-9000AP












































































































































































Search results

Summary of Contents for WLA-9000AP

Reviews:

Related manuals for WLA-9000AP

Brands by name

Popular brands

Air Live WLA-9000AP, User Manual

Search results

Summary of Contents for WLA-9000AP

Reviews:

Related manuals for WLA-9000AP

Brands by name

Popular brands